Temperature Control Functions; Communication Function - Fuji Electric Micro-Controller X Socket type Operation Manual

2-4 Temperature control functions

This controller has five types of temperature control function. Select according to type and use.
Temperature control
functions
ON/OFF (2-position)
control
PID control
Fuzzy control
Self tuning control
PID2 control
You can set the temperature control function in the parameter [CtRL] (see page 36).

2-5 Communication function

This controller has the interface for the dedicated cable which allows data transmission with a PC.
Switches output control ON/OFF according to the SV/PV magnitude relationship.
Control systems can be built from simple elements such as SSR. This is appropriate
for situations where high accuracy is not required.
PID calculation and controls proceed according to the previously set PID parameters.
PID parameters can be set manually or through auto-tuning ([AT]).
It is the most basic control in this equipment.
Reduces the amount of overshoot during control. It is effective when you want to
suppress overshoot while changing SV, even during processes where it may take a
long time to reach the target value.
Adds controls while automatically calculating PID to meet the control target or
changing SV. It is effective when the control conditions change frequently.
Suppresses the amount of overshoot during control for processes that turn the control
target off and then on again. It is effective when the control target turns on and off
while power flows continuously to the temperature controller.
Personal
computer
Temperature control functions
Description
PC loader communication cable
19