[P-N2] Input Signal Code (043) - Fuji Electric Micro-Controller X Socket type Operation Manual

Parameter functions and setting procedure
P-N2 Input signal code (043)
[Description] –––––––––––––––––––––––––––––––––––––––––––––––––––––––
Allows you to select PV input source from thermocouples, RTD, and others.
Setpoint
JPt RTD JPt100
RTD Pt100
Pt
J Thermocouple J
K Thermocouple K
Thermocouple R
R
b Thermocouple B
S Thermocouple S
Thermocouple T
t
E Thermocouple E
L Thermocouple L
The connection to the terminal block differs with types of input (thermocouple/
●
RTD/voltage or current input). Check the Instruction Manual.
Power-cycle the controller after you change the input type setting.
●
[Setting example] Changing the input from thermocouple K to thermocouple R ––
Display
1.
2.
3.
4.
5.
6.
Description
Press and hold the key for about three seconds during the SV/PV display.
➔ appears.
➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the or keys to change " K " to " R ."
Press the key or wait for three seconds to save the change.
Press the key.
➔ The screen returns to the SV/PV display.
➔
Setpoint
N Thermocouple N
Thermocouple PL-II
PL-2
W Thermocouple W
0-5V 0 to 5 V DC
1 to 5 V DC
1-5V
0-10 0 to 10 V DC
2-10 2 to 10 V DC
0 to 20 mA DC
0-20
4-20 4 to 20 mA DC
U Thermocouple U
MV MV
Operating procedure
42
Description