[Setting example] Setting P = 10.0%, I = 100sec, D = 20sec –––––––––––––––––
Display
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Press and hold the
key for about three seconds during the SV/PV display.
➔ appears.
➔
Press the
key.
➔ The setpoint starts blinking.
➔
Press the
,
or
Press the
key or wait for three seconds to save the change.
➔ The setpoint is set to " 10.0 ."
➔
Press the
key to display .
Press the
key.
➔ The setpoint starts blinking.
➔
Press the
or
keys to change " 240 " to " 100 ."
Press the
key or wait for three seconds to save the change.
➔ The setpoint is set to " 100 ."
➔
Press the
key to display .
Press the
key.
➔ The setpoint starts blinking.
➔
Press the
or
keys to change " 60.0 " to " 20.0 ."
Press the
key or wait for three seconds to save the change.
Press the
key.
➔ The screen returns to the SV/PV display.
➔
Operating procedure
keys to change " 5.0 " to " 10.0 ."
31
2nd block parameter