[Svof] Sv Shift (050) - Fuji Electric Micro-Controller X Socket type Operation Manual

SVOF SV shift (050)
[Description] –––––––––––––––––––––––––––––––––––––––––––––––––––––––
This function specifies the SV shift. This is used to eliminate remaining offset when using P control.
Setting range
-50.00 to 50.00%FS
Controls act on the calculated SV with SV offset.
●
Alarm determination acts on the displayed SV without SV offset.
●
[Setting example] Setting the SV shift to 7°C –––––––––––––––––––––––––––––
Display
1.
2.
3.
4.
5.
6.
Press and hold the key for about three seconds during the SV/PV display.
➔ appears.
➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the or keys to change " 0.0 " to " 7.0 ."
Press the key or wait for three seconds to save the change.
Press the key.
➔ The screen returns to the SV/PV display.
➔
Operating procedure
.
47
2nd block parameter