[Ptn] Ramp Soak Execution Pattern (055) - Fuji Electric Micro-Controller X Socket type Operation Manual

Parameter functions and setting procedure
Ramp soak execution pattern (055)
PtN
[Description] –––––––––––––––––––––––––––––––––––––––––––––––––––––––
The 8-step ramp soak patterns are divided into 3 segments. You can choose any one to use.
Description
Setpoint
1 Steps 1 to 4
2 Steps 5 to 8
3 Steps 1 to 8
Do not change this parameter during the ramp soak operation. Be sure to set
●
[PRoG] = "oFF" before changing the parameter.
If you set [SV-H] and [SV-L] after setting SV, SV indicated during the ramp soak
●
operation is limited while SV itself does not change.
[Setting example] Setting the Ramp soak Activation Pattern to steps 1 to 8 –––––
Display
1.
2.
3.
4.
5.
6.
SV
Press and hold the key for about three seconds during the SV/PV display.
➔ appears.
➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the key to change " 1 " to " 3 ."
Press the key or wait for three seconds to save the change.
Press the key.
➔ The screen returns to the SV/PV display.
➔
SV-3
SV-2
SV-1
Steps 1 to 4: 1
Steps 1 to 8: 3
Operating procedure
.
52
SV-8
SV-6
SV-4
SV-7
SV-5
Steps 5 to 8: 2
time