Fuji Electric Micro-Controller X Socket type Operation Manual page 71

[Setting example] Hiding the integral time [i] and the derivative time [d] ––––––––
<Preparations>
Check the mask DSP of the parameter(s) you want to hide.
●
(the mask DSP of the integral time [i] is "dSP3-4," the mask DSP of the derivative time [d] is "dSP3-4."
If you want to hide multiple parameters of the same code, calculate the hexadecimal number of the
●
total integer.
Display
1.
2.
3.
4.
5.
6.
The integral time [i] and the derivative time [d] are hidden.
If you want to reshow the derivative time [d], carry out the steps 1 to 3, and then change
the setpoint from " 000C " to " 0004 ."
Press and hold the key for about five seconds during the SV/PV display.
appears.
➔ ➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the , or
Press the key or wait for three seconds to save the change.
Press the key.
➔ The screen returns to the SV/PV display.
➔
Operating procedure
.
keys to change " 0000 " to " 000C ."
69
3rd block parameter