Fuji Electric Micro-Controller X Socket type Operation Manual page 25

[Setting example] Starting the ramp soak program ––––––––––––––––––––––––
Display
1.
2.
3.
4.
5.
6.
Press and hold the key for about one second during the SV/PV display.
appears.
➔ ➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the or keys to change " oFF " to " RUN ."
Press the key or wait for three seconds to save the change.
➔ The ramp soak program starts.
➔
Press the key.
➔ The screen returns to the SV/PV display.
➔
Operating procedure
.
23
1st block parameter