Upper Tray - MINOLTA-QMS Magicolor 2200 Series Manual

1-3 Upper tray

The drive force that has been supplied from the transport motor is conveyed as follows.
When the paper take-up solenoid (SL3) is set on, the take-up clutch engages and drive power is conveyed to the take-up
roller, and one sheet of paper is lifted up and transported by the Vertical Transport Roller/Paper Transport Roller roller.
The frictional force of the separator pad prevents the second sheet of paper from being sent simultaneously.
• The paper size is detected by the paper size switch and paper size setting plate. The paper size is determined by the
combined L and H signals from the switches as shown in the table below.
• The opening of the cassette door for correcting a paper jam is detected by door open sensor (PC4).
Paper size
switch (S8)
Cassette – Rear view
Paper size setting plate
SW1 SW2
L H
H H
H H
Other
Upper tray door
open sensor (PC4)
C-4
SW3 Paper size
H Letter
L Legal
H A4
Cassette not set
Cassette – Side view
Cassette paper take-up
solenoid (SL3)