MINOLTA-QMS Magicolor 2200 Series Manual page 4

3. Use the specified parts.
• For replacement parts, always use the genuine parts specified in the parts manual. Installing
a wrong or unauthorized part could cause dielectric breakdown or overload, or undermine
safety devices resulting in possible electric shock or fire.
• Replace a blown electrical fuse or thermal fuse with its corresponding genuine part speci-
fied in the parts manual. Installing a fuse of a different make or rating could lead to a possi-
ble fire. If a thermal fuse blows frequently, the temperature control system may have a
problem and action must be taken to eliminate the cause of the problem.
4. Handle the power cord with care and never use a multiple outlet.
• Do not break, crush, or otherwise damage the power cord. Placing a heavy object on the
power cord, or pulling or bending it may damage it, resulting in a possible fire or electric
shock.
• Do not use a multiple outlet to which any other appliance or machine is connected.
Be sure the power outlet meets or exceeds the specified capacity.
5. Be careful with the high-voltage parts.
• A part marked with the symbol shown on the left carries a high voltage. Touching it could
result in an electric shock or burn. Be sure to unplug the power cord before servicing this
part or the parts near it.
6. Do not work with wet hands.
• Do not unplug or plug in the power cord, or perform any kind of service or inspection with
wet hands. Doing so could result in an electric shock.
7. Do not touch a high-temperature part.
• A part marked with the symbol shown on the left and other parts such as the exposure lamp
and fusing roller can be very hot while the machine is energized. Touching them may result
in a burn.
• Wait until these parts have cooled down before replacing them or any surrounding parts.
8. Maintain a grounded connection at all times. (This item may not apply in the USA.)
• Be sure to connect the ground wire to the ground terminal even when performing an inspec-
tion or repair. Without proper grounding, electrical leakage could result in an electric shock
or fire.
• Never connect the ground wire to a gas pipe, water pipe, telephone ground wire, or a light-
ning conductor.
9. Do not remodel the product.
• Modifying this product in a manner not authorized by the manufacturer may result in a fire
or electric shock. If this product uses a laser, laser beam leakage may cause eye damage or
blindness.
ii