Power-On Sequence - MINOLTA-QMS Magicolor 2200 Series Manual

9

Power-on sequence

The following diagram shows the initialization process the printer follows after the power is turned on.
Power on
Option check
Paper misfeed check
Cover open check
Units connected check
Warm-up start
Preliminary rotation
Rack initialization
Cleaning
New toner cartridge check
Automatic Image Density Contol
(AIDC) check
Warm-up completed
Initialization completed
• Lower tray, duplex unit, 5-bin mailbin
• Checks if the covers are open. Names of covers: front
cover R/L, fusing cover, transport cover, upper tray
door, duplex unit door, mailbin door.
• Checks connected units. Names of units: fusing unit,
image transfer unit, oil coating roller, waste toner con-
tainer, laser lens cover.
• The warm-up of the fusing unit starts.
• The rack is rotated and the installation of the toner car-
tridge is confirmed.
• OHP sensor checked.
• The black toner cartridge is aligned with the home posi-
tion.
• The image transfer belt is cleaned.
• Detects a new toner cartridge.
• Checks the Automatic Image Density Control of each
color YMCK.
B-25