2
Installation
2-1 Transporting
Before moving the printer, always remove the drum cartridge, toner cartridge, media, and any optional equipment.
WARNING
Never attempt to lift the printer alone. Always use two people when removing the printer from its shipping package and
when transporting it. The printer weighs approximately 40 kg/88 lb without the drum cartridge and toner cartridge. If it
is lifted by one person, back injury could occur or the printer could be dropped and damaged.
*
Always remove the toner cartridge before transporting the printer. If the printer is transported without removing the
toner cartridge, the vibration will cause toner to fall onto the laser lens cover.
2-2 Connecting the ground
Always ground the printer to prevent electrical leakage, shocks and other such hazards.
• Always connect the ground wire to a proper ground point, such the ground terminal of the outlet or a ground point
that complies with local electrical standards.
• Never connect the ground wire to an incomplete ground point, such as a gas pipe, the ground wire for a telephone, or a
water pipe.
A-3