Parts To Be Cleaned; Service Tools; Screws - MINOLTA-QMS Magicolor 2200 Series Manual

1-2 Parts to be cleaned

Part name
Paper take-up roller
Laser lens cover
General Cleaning

1-3 Service tools

Phillips screwdriver
(No. 2)
Standard servicing

1-4 Screws

Drawing
There are screws other than those shown here. Always use the same screw in the same location when reassembling. In
particular, always use screws with toothed washers in the same location.
Cleaning procedure
Wipe off any contamination from the sur-
face of the roller with a soft, dry cloth.
Wipe off exterior and interior of printer.
Vacuum excess toner from the inside of
the printer with a toner vacuum.
Phillips long
screwdriver
For parts with Phillips
head screws
No.
3541 Silver color
9735-0308-14
3504
Copper color
9735-0308-13
3704
Copper color
9739-0308-13
1308
Silver color
9646-0308-13
8301
Copper color
9712-300-13
Tools
Tweezers
Standard servicing
D × L (mm)
3 × 8 mm
3 × 8 mm
3 × 8 mm
3 × 8 mm
—
D-4
Notes
Cleaning by user
Cleaning by user.
Needle nose pliers
For E-rings
Application
For mounting external parts
For mounting internal parts
For mounting internal parts
For mounting external parts
(Levers and knobs)
For mounting external covers