Lower Tray - MINOLTA-QMS Magicolor 2200 Series Manual

1-4 Lower tray

Lower tray can store up to 500 sheets of paper. Its design and function are the same as upper tray. A paper take-up miss
of lower tray is detected by the newly added lower tray paper take-up sensor. The tray paper take-up sensor detects
whether or not paper take-up has been properly performed. If the paper take-up has not been properly performed, it is
detected as a paper jam (misfeed). Refer to "1-2 Upper tray" on the previous page for details about other design and
function items.
1
7
Name
1. Paper size/tray detection switch
2. Paper take-up solenoid
3. Paper take-up sensor
4. Paper take-up roller
5. Transport roller
6. Paper empty sensor
7. Paper near empty sensor
8. Drive Transmission Gear
2
Detects the size of the paper in the tray and whether or not there
is a cassette tray.
Provides drive power to the paper take-up roller.
Optional cassette only.
Picks up and feeds the top-most sheet of paper.
Transports the paper to the transport roller and timing roller.
Detects when there is no paper in the cassette tray.
Detects when there are approximately 50 sheets remaining in the
cassette.
Drive motors are not installed in this tray. The drive for feeding
and transporting paper is transmitted from the printer via the
Drive Transmission Gear.
C-5
8 3
Function
4
5
6