MINOLTA-QMS Magicolor 2200 Series Manual page 9

Please read the following for your own protection.
Opening the cover indicated by Caution label below may expose you to harmful laser radiation which could cause dam-
age or loss of eyesight. Do not open the cover when the power is on.
PRECAUTIONS
(1) Precautions
Refer to D: DISASSEMBLY/CLEANING for the disassembly procedure.
1. When unplugging connectors on the PWBs themselves, always make sure the power is OFF first. Be sure to unplug
the printer before disassembling and cleaning.
2. Always unplug connectors by holding the connector housing. Pulling on the wires can lead to problems with poor
contact.
3. It is recommended that a body ground not be used when carrying out any troubleshooting procedure. Be sure to
ground DC lines to a ground test point on the PWB
(2) At Replacement/Adjustment/Cleaning
1. Be sure to handle the Fusing Unit carefully. It remains hot a while after the printer is turned off.
2. Do not disassemble the Imaging Cartridge or Print Head Unit.
CAUTION
vii