Installation Environment; Precautions When Installing - MINOLTA-QMS Magicolor 2200 Series Manual

1

Precautions when installing

1-1 Installation environment

Ensure the following conditions are met when installing the printer:
• It is not exposed to direct sunlight.
• It is not exposed to rapid changes in temperature and humidity.
• It is not exposed to extremely high or extremely low temperature and humidity.
• It is not in direct contact with the outlet airflow from an air conditioner heater or ventilator.
• Does not have low levels of moisture, dust, and other airborne materials in the area.
• It is level and not subject to vibration.
• It is away from sources of heat, such as kerosene heaters.
• Does not expose the power supply to water which could cause electrical leakage.
• It is not exposed to volatile materials (such as thinners and gasoline) or corrosive gases.
Environmental requirements
The printer has the following operating environment requirements:
Temperature: 10–35° C/50–95° F
Humidity: 15–85%
Power requirements
The printer has the following power supply requirements:
Power supply: 100V, 120V
220V, 240V
50/60 Hz
• When other electrical appliances are plugged into the same power outlet, make sure that the current capacity of the
outlet is not exceed.
• When using sockets with multiple outlets, never plug in excessive numbers of cords.
• Make sure that following conditions are met after the printer has been installed.
*
The power cord is free of cracks, damage, and other defects.
*
The plug from the power cord is securely inserted into the socket.
*
The plug from the power cord is not abnormally hot.
Temperature fluctuation:
Humidity fluctuation:
Voltage fluctuation
Voltage fluctuation
Frequency fluctuation
A-2
10°C/50° F per hour or less
20% per hour or less
±10% or less
±10% or less
±3 Hz or less