MINOLTA-QMS Magicolor 2200 Series Manual page 107

3. Remove the duplex unit circuit board (PWB-AD)
4. Remove the motor cover
5. Remove the motor mount plate
6. Remove the switchback motor
Switchback
motor
1. Remove the circuit board cover.
2. Remove the 2 set screws for the duplex unit circuit board (PWB-
AD). (There are 3 connectors.)
1. Remove the 1 set screw for the motor cover.
Cover hook
1. Remove the 3 set screws for the circuit board and the 2 connectors
for the motor mount plate.
1. Remove the 3 set screws for the motor mount plate.
2. Remove the 2 set screws for the switchback motor. (There are 3
harness saddles.)
D-23