MINOLTA-QMS Magicolor 2200 Series Manual page 28

Printer control levers
The following shows the control levers with the printer with the front cover open and the waste toner container
removed.
7
6
No.
1. Image transfer belt unit
2. Image transfer belt unit left release lever
3. Image transfer belt unit right release lever
4. Toner cartridge rack dial
5. Toner cartridge rack release button
6. Toner cartridge removal port
7. Toner cartridge eject lever
1
4
5
Name
B-10
2
Function
The toner image overlays the four YMCK colors for
developing.
This is used for removing the OPC drum/transfer belt
unit.
This retracts the image transfer roller from the image
transfer unit for removing the image transfer belt unit.
This is used when removing the Y, M, C, K, Toner car-
tridges and image transfer belt. It is used to turn the rack
and align each of the color cartridges with the removal
port.
This is used to release the lock for the knob (dial) used
for turning the rack.
This is the opening for removing toner cartridge.
This is used to pull the toner cartridge forward.
3