MINOLTA-QMS Magicolor 2200 Series Manual page 3

Safety Precautions for Inspection and Service
When performing inspection and service procedures, observe the following precautions to prevent accidents and ensure
utmost safety.
* Depending on the model, some of the precautions given in the following do not apply.
Different markings are used to denote specific meanings as detailed below.
WARNING
CAUTION
The following graphic symbols are used to give instructions that need to be observed.
Used to call the service technician's attention to what is graphically represented inside the
marking (including a warning).
Used to prohibit the service technicians from doing what is graphically represented inside the
marking.
Used to instruct the service technicians to do what is graphically represented inside the mark-
ing.
1. Always observe precautions.
• Parts requiring special attention in this product include a label containing the mark shown
• Be sure to observe the "Safety Information" given in the user documentation.
2. Before starting the procedures, be sure to unplug the power cord.
• This product contains a high-voltage unit and a circuit with a large current capacity that
• The product also contains parts that can jerk suddenly and cause injury.
• This product uses a laser, laser beam leakage may cause eye damage or blindness.
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury. It may also be used to alert against
unsafe practices.
on the left plus precautionary notes. Be sure to observe the precautions.
may cause an electric shock or burn.
WARNING
i