MINOLTA-QMS Magicolor 2200 Series Manual page 6

3. Precautions for the Working Environment
• The product must be placed on a flat, level surface that is stable and secure.
• Never place this product or its parts on an unsteady or tilting workbench when servicing.
• Provide good ventilation at regular intervals if a service job must be done in a confined space
for a long period of time.
• Avoid dusty locations and places exposed to oil or steam.
• Avoid working positions that may block the ventilation ports of the product.
4. Precautions for Handling Batteries (Lithium, Nickel-Cadmium, etc.)
• Replace a rundown battery with the same type as specified in the manufacturer's parts man-
ual.
• Before installing a new battery, make sure of the correct polarity of the installation or the bat-
tery could burst.
• Dispose of used batteries according to the local regulations. Never dispose of them at the
user's premises or attempt to try to discharge one.
5. Precautions for the Laser Beam (Only for Products Employing a Laser)
• Removing the cover marked with the indicated caution label could lead to possible exposure
to the laser beam, resulting in eye damage or blindness. Be sure to unplug the power cord
before removing this cover.
• If removing this cover while the power is ON is unavoidable, be sure to wear protective laser
goggles that meet specifications.
• Make sure that no one enters the room when the machine is in this condition.
• When handling the laser unit, observe the "Precautions for Handling Laser Equipment."
iv