5-4 Error Drive motor errors
There are three drive motor errors: transport motor error, fusing motor error and fusing pressure motor.
5-4-1 Service Call 08 MAIN MOTOR (Transport motor error
No.
1.
Does the transport motor (M1) operate during
printing?
Others
Transport motor (M1) operation detection is performed from one second after the start of transport motor (M1) opera-
tion to the stop of transport motor (M1) operation.
A transport motor error is detected when the transport motor M_Lock signal is active for 0.5 seconds.
Transport motor operation
Transport motor
H
M1 Lock
L
Check
ON
OFF
1 second
E-22
Result
Corrective action
No
Ensure the connection of the connector
(PJ21A) is secure.
Replace the transport motor.
Yes
Check if there is excessive load on any of
the rollers, gears, etc. Repair.
Replace PWB-A
0.5 seconds
)