MINOLTA-QMS Magicolor 2200 Series Manual page 149

Sensor input confirmation
Checking sensor input is done in test mode.
No.
Sensor name
1 Mode display
Light on display
Sensor name
2 Mode display
Light on display
Sensor name
3 Mode display
Light on display
Mode and sensor status are displayed alternately.
Mode display (3 seconds) → Sensor status display (5 seconds) → Mode display (3 seconds) → Repeats.
LD1 LD2
Bin1 empty Bin 2 empty
Out Flashing
No paper No paper
Bin 1 full Bin 2 full
Out Flashing
Full detected Full detected
Door sensor —
Out Flashing
Door closed —
LD3
Bin 3 empty
Out
No paper
Bin 3 full
Flashing
Full detected
—
Flashing
—
E-35
LD4 LD5
Bin 4 empty Bin 5 empty
Flashing Out
No paper No paper
Bin 4 full Bin 5 full
Out Out
Full detected Full detected
— —
Flashing Out
— —