Image Transfer Belt Errors - MINOLTA-QMS Magicolor 2200 Series Manual

5-6 Image transfer belt errors

There are three image transfer belt errors. They are image transfer belt errors, belt cleaner pressure error, and AIDC
error.
5-6-1 Service Call 16 XFER BELT ROT (Image transfer belt error
No.
1. Does the image transfer belt rotate during print-
ing?
Others
Detection of image transfer belt rotation is performed from start to stop of image transfer belt rotation.
A image transfer belt error is detected during transport motor operation if there is no change at the image transfer belt
position sensor within each specified time interval.
The printer must be cycled off and on again to clear the error (if applicable).
Image transfer belt error detection
image transfer belt
H
PC12
L
Check
ON
Specified time
OFF
E-26
Result Corrective action
No Check if the image transfer belt unit is prop-
erly positioned and repair it.
Yes Replace the image transfer belt unit.
Replace PWB-A .
Specified time Specified time
)
Error