MINOLTA-QMS Magicolor 2200 Series Manual page 5

10. Restore all parts and harnesses to their original positions.
• To promote safety and prevent product damage, make sure the harnesses are returned to
their original positions and properly secured in their clamps and saddles in order to avoid
hot parts, high-voltage parts, sharp edges, or being crushed.
• To promote safety, make sure that all tubing and other insulating materials are returned to
their original positions. Make sure that floating components mounted on the circuit boards
are at their correct distance and position off the boards.
1. Precautions for Service Jobs
• A toothed washer and spring washer, if used originally, must be reinstalled. Omitting them
may result in contact failure which could cause an electric shock or fire.
• When reassembling parts, make sure that the correct screws (size, type) are used in the cor-
rect places. Using the wrong screw could lead to stripped threads, poorly secured parts, poor
insulating, or grounding, and could result in a malfunction, electric shock or injury.
• Take great care to avoid personal injury from possible burrs and sharp edges on the parts,
frames, and chassis of the product.
• When moving the product or removing an option, use care not to injure your back or allow
your hands to be caught in mechanisms.
2. Precautions for Servicing with Covers and Parts Removed
• Wherever feasible, keep all parts and covers mounted when energizing the product.
• If energizing the product with a cover removed is absolutely unavoidable, do not touch any
exposed live parts and use care not to allow your clothing to be caught in the moving parts.
Never leave a product in this condition unattended.
• Never place disassembled parts or a container of liquid on the product. Parts falling into, or
the liquid spilling inside, the mechanism could result in an electric shock or fire.
• Never use a flammable spray near the product. This could result in a fire.
• Make sure the power cord in unplugged before removing or installing circuit boards or plug-
ging in or unplugging connectors.
• Always use the interlock switch actuating jig to actuate an interlock switch when a cover is
opened or removed. The use of folded paper or some other object may damage the interlock
switch mechanism, possibly resulting in an electric shock, injury, or blindness.
CAUTION
iii