Multipurpose Paper Take-Up Tray; Cassette Paper Take-Up Section - MINOLTA-QMS Magicolor 2200 Series Manual

3-12 Multipurpose paper take-up tray

1. Remove the bearing on the front side of the multipurpose tray paper take-up section
2. Remove the bearing on the rear side of the multipurpose tray paper take-up section

3-13 Cassette paper take-up section

1. Remove the paper size switch
2. Remove the paper near-empty sensor
1. Remove the front cover.
2. Remove the front center cover.
3. Remove the 1 set screw for the bearing on the front side.
4. Remove the 1 plastic c-clip and slide the pivot arm from the shaft..
1. Remove the rear cover.
2. Remove the 1 set screw for the bearing on the rear side.
3. While using care for the spring, remove the bearings on the front
and rear side.
4. Remove the multipurpose paper take-up unit. (There is 1 connec-
tor.)
1. Remove the 2 trays from the unit.
2. Remove the hook for the paper size switch and pull out the 1 con-
nector.
1. Remove the hook for the paper near-empty sensor and pull on the 1
connector.
D-14