7. Remove the paper guide
3-15 Developing section
1. Remove the toner empty sensor
2. Remove the front rack bearing
3. Remove the rack lock lever
1. Remove the front cover.
2. Remove the control panel cover.
3. Remove the front center cover.
4. Remove the rear cover.
5. Remove the registration roller.
6. Remove the lower paper take-up guide.
7. Remove the 4 screws and remove the paper guide.
1. Remove the front cover.
2. Remove the control panel.
3. Remove the front center cover.
4. Remove the 1 toner empty sensor connector and 2 set screws.
1. Remove the front cover.
2. Remove the control panel.
3. Remove the front center cover.
4. Remove the 3 set screws for the front rack bearing and remove it.
1. Remove the rear cover.
2. Remove the left-rear cover.
3. Remove the left cover.
4. Remove 2 screws for the rack lock lever and remove it. The screw
from the left side has a serrated washer.
D-17