Scope Of Delivery; Accessories; Transportation And Storage; Delivery - Wilo FKT 50.1 Series Installation And Operating Instructions Manual

+ emu fa
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 164
en
4.8

Scope of delivery

4.9

Accessories

5

Transportation and storage

5.1

Delivery

5.2

Transport

176
Transportation and storage
Example: Wilo-EMU FA 50.98D + FKT 63.1-8/70GEx-E3
Seal version
G
Ex-rated
Ex
IE-efficiency class (derived from IEC 60034-30)
E3
▪ Pump with free cable end
▪ Cable length per customer request
▪ Mounted accessories, e.g. external pencil electrode, pump support foot, etc.
▪ Installation and operating instructions
▪ Suspension unit
▪ Pump support foot
▪ Special versions with Ceram coatings or special materials
▪ External pencil electrode for sealing chamber control
▪ Level control devices
▪ Fixation accessories and chains
▪ Switchgear, relays and plugs
After receiving the shipment, this must be checked immediately for defects (damage,
completeness). Defects must be noted on the freight documentation! Furthermore, de-
fects must be notified to the transport company or the manufacturer immediately on
the day of receipt of shipment. Subsequently notified defects can no longer be asser-
ted.
WARNING
Standing under suspended loads!
Never allow anyone to stand under suspended loads! Danger of (serious) injuries
caused by falling parts. Loads may not be carried over work places where people are
present!
WARNING
Head and foot injuries due to a lack of protective equipment!
Danger of (serious) injuries during work. Wear the following protective equipment:
• Safety shoes
• Safety helmet must be worn if lifting equipment are used!
NOTICE
Use only properly functioning lifting equipment!
Use only properly functioning lifting equipment to lift and lower the pump. Ensure
that the pump does not become jammed during lifting and lowering. Do not exceed
the maximum bearing capacity of the lifting equipment! Check that lifting equip-
ment is functioning properly before use!
Only remove the outer packaging at the place of utilisation to ensure that the pump is
not damaged during transport. Use tear-proof plastic sacks of sufficient size to pack-
age used pumps for transport in a leak-proof manner.
The following points must also be observed:
WILO SE 2019-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fkt 57 seriesFkt 63.1 seriesFkt 63.2 series

Table of Contents