How To Use The Memory Switch - Siruba LKS-1900AN Instruction Book

[ 8 ] 記憶體開關的使用方法
•變更記憶體開關的設定，可以變更縫紉機的
動作方法。
1. 記憶體開關的啟動和變更
1）縫製 LED 滅燈的狀態下，按
記憶體開關的設定方式。
※ 按「M」鍵之後，顯示的 1.30 表示存儲器
開關第 1 號的最高速度限制為 3200sti/min
（工廠出貨狀態）
1）When key is pressed in the state that
the sewing LED is put out, the memory
switch setting mode is obtained.
※32 which is indicated when "M" key is
pressed indicates that the max. speed
limitation of the first memory switch is 3,200
sti/min. (State at the time of delivery from
the factory)
2）記憶體開關號碼可以用
行變更。
2）Change the memory switch No. with
or key.
3）按 鍵，調整想變更的記憶體開關號碼。縫製 LED 亮燈。
3）Adjust the memory switch No. to the No. you desire to change, and press
The sewing LED lights up.
4）用
鍵、
容。
4）Change the contents of the memory switch
with or
5）按
鍵，可以返回到工廠出貨設定值。
The value can be returned to the value at the time of delivery from the factory with
5）
6）按 鍵，登記變更內容。縫製 LED 滅燈，返回記憶體開關號碼的選擇狀態。
Press key to register the contents of change. Sewing LED goes off and the mode
6）
returns to the selective state of the memory switch No.
7）按
鍵，結束記憶體開關設定方式，返回到通常狀態。
Press key to finalize the memory switch setting mode and the mode returns to the
7）
normal mode.
P49
之後，成為
鍵、 鍵進
鍵變更記憶體開關的內
key.
[8] HOW TO USE THE MEMORY
SWITCH
•The sewing machine operation can be
changed by changing the setting of the
memory switch.
1. Start and change of the memory switch
Two figures from the
Three figures from bottom are contents of
the top are memory setting.
switch Nos.
key.
key.