Siruba LKS-1900AN Instruction Book page 73

(4) 計數器動作的設定
設定例 ：把生產計數器（加算方式）變更
為底線計數器（減算方式）。
1）在縫製 LED 滅燈的狀態下，按
1）Press key in the state that the sewing
LED is put out.
2）用
鍵、
No.18。
2）Indicate memory switch No. 18 with
or key.
3）按 鍵。縫製 LED 亮燈，計數器動作的
設定值被顯示出來。
3）Press key. The sewing LED lights
up and the set value of counter motion is
indicated.
4）按 鍵把設定值設定為 1。
設定值 0：縫製計數器，1：底線計數器。
4）Set the set value to "1" with
Set value 0 : Production counter
Set value 1 : Bobbin thread counter
5）按 鍵，登記設定值。縫製 LED 滅燈
Press key to register the set value. The sewing LED goes off.
5）
6）按
鍵。結束記憶體開關設定方式，返回待機狀態。
Press key. The memory switch setting mode is finalized and the mode returns to the
6）
normal mode.
鍵。
鍵顯示出記憶體開關
key.
(4) Setting the counter operation
Setting example : The production counter
(adding method) can be changed to
the bobbin thread counter(subtracting
method).
Introduction
P54