13. 護目鏡的安裝
請一定把護目鏡①用螺絲②安裝到安裝部
③之後再使用縫紉機。
危險
DANGER
14. 線架的安裝
⑴如圖所示那樣把線架安裝到機台孔上。
⑵用固定螺母①固定線架。
⑶頂線配線時,請把電源線從線架桿②中
穿過。
[ 4 ] 縫紉機的準備
1. 加油方法
請確認機油在下線 B 和上線 A 之間。如果
機油過少時,請用附屬的加油器進行加油。
P13
為了保護斷針飛起弄傷眼睛,請一定安裝起來。
Be sure to attach this cover to protect the eyes from the disperse of needle
breakage.
②
②
①
13. Installing the eye protection cover
Be sure to use eye protection cover ①
after installing it on installing section ③
with screws ② .
③
①
14. Installing the thread stand
⑴Assemble the thread stand unit, and
insert it in to the hole on the machine
table.
⑵Tighten locknut ① to fix the thread
stand.
⑶For ceiling wiring, pass the power cord
through spool rest rod ② .
[4] OPERATION OF THE SEWING
MACHINE
1. Lubrication
Check that the place between lower line B
and upper line A is filled with oil. Fill there
with oil using the oiler supplied with the
machine as accessories when oil is short.