Siruba LKS-1900AN Instruction Book page 23

⑧ 項目選擇 LED
Item selection LED
⑨ 夾線 ON/OFF
Needle thread clamp
ON/OFF key
⑩ 夾線顯示 LED
Needle thread clamp
display LED
圖案登記鍵
Needle thread clamp
display LED
【註 1】 LKS-1903AN 標準出貨時，記憶體開
關 No.35 設定為禁止（不動作）夾線。
被選擇的項目的 LED 亮燈。
LEDs of the selected items light up.
圖案 No
Pattern No.
縫製計數器
Sewing counter
卷線
Bobbin winder
可以選擇夾線功能的有效 / 無效。有效時，夾 線顯示 LED 亮燈。（註 1）
This key selects effective/ineffective of needle thread clamp. When it is effective,
needle thread clamp display LED lights up. (Note 1)
亮燈時，進行夾線動作。
When this LED lights up, needle thread clamp operates.
登記圖案。登記後的圖案，只要一按此鍵就可以立即進行縫製。變更擴大縮小率、
縫製位置等可以進行登記。
This key registers the pattern. When this key is pressed, the pattern registered here
can sew immediately. X/Y scale, sewing position, etc. can be changed and registered.
X 擴大縮小率
X scale
最高速度限制
Max. speed limitation
壓腳下降
Work clamp foot lowering
【Note 1】 LKS-1903AN is set to needle
thread clamp prohibited (no motion) with
memory switch No. 35 at the time of standard
delivery.
Introduction
Y 擴大縮小率 X
Y scale
線張力
Thread tension
P4