Siruba LKS-1900AN Instruction Book page 71

4）用
鍵、 鍵顯示出"1000＂。
按 鍵則返回工廠出貨時的初期值。 按
鍵之後，現在的操作全被取消，返回 2）
的狀態。
4）Indicate "1000" with
value returns to the initial value at the time
of delivery from the factory with
Press key to cancel the operation here
and return to the state of step 2).
5）按 鍵。縫製 LED 亮燈，第 1 針的設定
值被登記。
5) Press key. The sewing LED goes
off and the set value of the first stitch is
registered.
6）用
鍵、 鍵顯示出記憶體開關
No.3。這裡設定第 2 針的縫紉機速度。
6) Indicate memory switch No. 3 with
key.Here, set the sewing speed of the
second stitch.
7）按 鍵。縫製 LED 亮燈，第 2 針的設定
值被顯示出來。
7）Press key The sewing LED lights up
and the set value of the second stitch is
indicated.
8）用
鍵、 鍵顯示出"2000＂。按
鍵則返回工廠出貨時的初期值。按
之後，現在的操作全被取消，返回 6）的狀
態。
8) Indicate "2000" with
value returns to the initial value at the time
of delivery from the factory with
Press key to cancel the operation here
and return to the state of step 6).
9）按 鍵。縫製 LED 滅燈，第 2 針的設
定值被登記。
9）Press key. The sewing LED goes
off and the set value of the second stitch is
registered.
10）按
鍵。結束記憶體開關設定方式，返回待機狀態。
Press key. The memory switch setting mode is finalized and the mode returns to the
10）
normal mode.
or key. The
key.
or
鍵
or key.The
key.
Introduction
P52