Operation Switch - Siruba ASP-PTA100 Original Instructions Manual

操作面板與啟動開關
1. 操作面板
準備鍵
Ready button
2. 腳踏開關
啟動開關
Activation switch
啟動車縫有兩種模式：
直接啟動車縫模式
1
Directly sewing mode
兩段式車縫模式
2
2-step sewing mode
※ 模式選擇請參閱人機介面使用說明
壓腳開關
Switch for presser foot
踩踏啟動開關時，壓腳自動下壓就直接車縫
When activation switch, lowering presser foot automatically, then
directly start sewing
單踩壓腳開關時，可使壓腳下壓或抬升用於車縫對位，壓腳必須處
於下壓狀態，踩踏啟動開關才有作用，壓腳未下壓則無法啟動車縫
動作
We could merely tread switch for presser foot to lower or to raise
presser foot to align sewing position. Users should lower presser
foot and then activation switch will work. If not, users could not
start sewing.

OPERATION SWITCH

1. Operation panel
2. Knee pedal switches
Two modes to enable sewing:
※Please refer to instruction book of human
machine interface for mode selection
Introduction
SIRUBA
LKS-1903AN
操作面板
Operation panel
P4