Table of Contents
Advertisement
POWER, SWITCH
1. Input power : 220V, 60Hz.
2. Insert the foot control plug into the sewing
machine. Then plug the machine to the power
supply.
2. Turn switch to "ON" position.
3. Sewing speed can be varied by the speed
controller.
Separate the machine from the powersystem if you
leave it unsupervised.
Use only ZHEJIANG FOUNDER model FC-9001
foot controller with sewing machine.
REMOVING EXTENSION TABLE
Hold the left end of the table and pull it out in
direction of the arrow.
ACCESSORY BOX
1. The extension table can be open and accessories
taken out by following the arrow direction.
2. After taken accessories close by reverse side.
- 5 -
Advertisement
Table of Contents
