Siruba LKS-1900AN Instruction Book page 52

2. 使用組合功能（複合）的縫製
按順序排列已經登記的圖案登記（P1 ～
P50），登記到 C1 ～ C20，每縫製之後按
順序變換縫製圖案。 1 個組合號碼最多可以
登記 30 個圖案。
⑴組合的登記
設定例 ：按 P1、P2、P3 的順序組合進
行登記到 C1。
1）打開（ON）電源，按
（縫製 LED 應該滅燈）進入方式設定
（記憶體開 關設定）。
1）Turn ON the power switch and press
enter the mode setting (memory switch setting).
(Sewing LED should be put out.)
2）用
鍵、
Indicate the combination mode with
2）
key.
3）按 鍵。縫製 LED 亮燈，進入組合方式。
用 鍵、
3）Press key. Sewing LED lights up to enter
the combination mode.
C1 to C20 can be selected with
key.
4）按
鍵，然後按
P1 被設定到 C1 的第 1 圖案。
選擇 P1 ～ P50。
用
4) Press key, and then press
P1 is set to the first pattern of C1.
P1 to P50 can be selected with
key as well.
P33
鍵。
鍵顯示組合方式。
鍵可以選擇 C1 ～ C20。
or
鍵。
key.
or
2. Performing sewing using the combination
function
By arranging in the order of use of the
pattern register (P1 to P50) which have
been already registered and registering in
C1 to C20, the sewing pattern will change
in the order every time the sewing machine
finishes the sewing. One combination No.
can be registered up to the maximum 30
patterns.
(1) Register of the combination
Setting example : Combine in the order
of P1, P2 and P3, and register them in
the C1.
key to
or