Siruba LKS-1900AN Instruction Book page 7

2-1. 例如，向機針、彎針、分線器等需要穿
線的零件進行穿線或更換梭心時。
2-2. 例如，更換或調整組成機器的所有零部
件時。
2-3. 例如，檢查、修理、清掃機器時，或離
開機器時。
3. 為了防止觸電、漏電、火災事故，拔電源
插頭時，一定要手持插頭拔電線，而不能
拉著電線拔。
4. 不使用縫紉機閒放時，一定要關閉電源。
5. 為了防止因電氣零部件的損壞造成的事
故，停電後請一定關閉電源。
在各使用階段的注意事項
⑴搬 運
1. 為了防止人身事故，抬起縫紉機移動時，
請一定根據機器的重量採用確保安全的方
法進行搬運。另外，有關機器重量，請確
認使用說明書的說明。
2. 為了防止人身事故，抬起縫紉機移動時，
請採取確保安全的措施防止翻倒、掉落。
3. 為了防止不可預想的事故、掉落事故、機
器損壞，請不要再次包裝已經開箱的機器
進行搬運。
⑵開 箱
1. 為了防止人身事故，開箱時請按照從上方
開始的順序進行開箱。木框包裝時，請一
定要小心不要被釘子紮破。請把釘子從木
板上拔下來。
2. 為了防止人身事故，取出機器時，請一
定首先確認機器的重心位置然後小心地取
出。
2-1. For example, threading the parts such
as the needle, looper, spreader etc.
which have to be threaded, or changing
the bobbin.
2-2. For example, changing or adjusting all
component parts of the machine.
2-3. For example, when inspecting, repairing
or cleaning the machine or leaving the
machine.
3. Be sure to remove the power plug by
holding the plug section instead of the
cord section in order to prevent electrical-
shock, earth-leakage or fire accident.
4. Be sure to turn the power off whenever
the machine is left unattended between
works.
5. Be sure to turn the power off in the
case of power failure in order to prevent
accident resulting of breakage of electrical
components.
PRECAUTIONS TO BE TAKEN IN
VARIOUS OPERATION STAGES
⑴Transportation
1. Be sure to lift and move the machine in a
safe manner taking the machine weight
in consideration. Refer to the text of the
instruction manual for the mass of the
machine.
2. Be sure to take sufficient safety measures
to prevent falling or dropping before
lifting or moving the machine in order to
protect against accident that can result in
personal injury or death.
3. Once the machine has been unpacked,
never re-pack it for transportation to
protect the machine against breakage
resulting from unexpected accident or
dropping.
⑵Unpacking
1. Be sure to unpack the machine in the
prescribed order in order to prevent
accident that can result in personal injury or
death. In the case the machine is crated, in
particular, be sure to carefully check nails.
The nails have to be removed.
2. Be sure to check the machine for the
position of its center of gravity and take it
out from the package carefully in order to
prevent accident that can result in personal
injury or death.
Introduction
ⅴ