Pause Switch - Siruba BH9820 Operation Manual

⑭ At Last Stitch
The needle rod stops at the upper position
of the needle. Step start pedal (7) at this
time.
(Hold it until the cloth-feeding
board returns to the position for laying cloth.)
In thread-trimming actions, when the
cloth-feeding board returns to the position for
laying cloth, the system will hint "END OF
MANUAL MODE" in the operation panel.
Caution:
When setting
"Cut-after-Sewing", user shall look out the
action of cutter.

3.3 Pause Switch

Pause in Auto Sewing
The pause switch is generally used for
stopping the sewing
at thread-breakage
circumstance.
3.3.1 Methods for Pausing
During the sewing, press the pause
switch (1) to stop the sewing machine,
and then the operation panel will hint
"Pause Switch is pressed under machine
sewing status".
cutter action as
machine
and other
19