Siruba LKS-1900AN Instruction Book page 51

7）進行 4）、5）項操作。
※ 也可以指定選擇 P1、P25 的圖
案。 用
P25 則不顯示。
注意 : 縫製 LED 亮燈時， 按 P1 ～ P25 鍵之後，
壓腳下降。請注意不要夾到手指。
※ 參考 : P26 ～ P50 可以進行圖案登記。
～ 鍵不能登記只能用選擇圖案的
方式指定。請用
示。
縫製 LED 亮燈時，不能選擇 P26 ～
P50 的圖案。
鍵顯示。
沒有登記的 P1 ～
鍵進行顯


7) Perform the above items 4) and 5).
※The P1 to P25 can be indicated on
the display when selecting the pattern
by pressing the
key.
which have not been registered are not
indicated.
Caution
:Press P1 to P25 key while the sewing
LED lights up and the presser comes
down. Be careful that your fingers
are not caught in the presser.
※Reference: Pattern register from P26 to
P50 can be performed. Register can not be
performed in
pattern by the pattern selection only. Indicate
the pattern with
Pattern selection from P26 to P50 cannot be
performed while the sewing LED lights up.




Introduction
or
P1 to P25
to key. Designate the
or key.
P32