Mitsubishi Electric MELIPC MI5000 Series User Manual page 70

■Method to select module in "Reserved Station Function Enable" window
In the "Reserved Station Function Enable" window, reserved station temporary clear of multiple slave stations with a single
operation is possible.
• Reserved station temporary clear
• Remove reserved station temporary remove
■Relationship with parameters
Reserved station temporary clear is not reflected to "Network Configuration Settings" of "Basic Settings".
■If the master station has been reset or the power turned OFF
Reserved station temporary clear becomes not specified, and returns to the status set in master station "Basic Settings"
"Network Configuration Settings".
■If stations with reserved station temporary clear are removed from the network
Resetting the master station product or turning the power OFF results in the following differences between the master station
and local station.
• ERR LED status
• 'Reserved station settings status' (SW00C0 to SW00C7) and 'reserve station temporary clear sitting status' (SW0180 to
SW0187) information
If a difference occurs, return to normal status as in the procedure below.
1.
Reconnect the disconnected station.
2.
Carry out reserve station temporary clear settings, and remove temporary clear for the station to remove.
■Confirm the station No. set in the reserved station
Confirm the station No. set in the reserved station in the "Reserved Station Function Enable" window.
6 CC-Link IE Field Network FUNCTION
68
6.4 CC-Link IE Field Network diagnosis
1.
Connect slave stations specified as reserved stations to
the network.
2.
In the "CC-Link IE Field Diagnostics" window, click the
[Reserved Station Function Enable] button.
3.
In the "Reserved station list", click the station to clear as
a reserve station temporarily. If clicked, the station
display changes to red letters on an orange
background.
Only reserved stations can be selected. Reserved stations
are displayed in light blue.
4.
Click the [Settings end] button to temporarily clear the
reserve station.
5.
Debug added slave stations.
1.
Display the "Reserved Station Function Enable" window
using the same method as with reserve station
temporary clear.
2.
In the "Reserved station list", click a station to cancel the
temporary clearing of the reserved station. If clicked, the
station display changes to red letters on a light blue
background.
Only stations that have had reserved station status
temporarily cleared can be selected.
Stations that have had reserved station status temporarily
cleared are displayed in orange.
3.
Click the [Settings end] button to return to reserved
stations.