Mitsubishi Electric MELIPC MI5000 Series User Manual page 71

Temporary error disabled station settings/remove
Temporarily set slave stations that have not been set as error disabled stations to error disabled stations. Use this feature so
that slave station errors are not detected temporarily.
Additionally, remove temporary error disabled station settings for slave stations that are temporarily error disabled stations.
A reserved station can be configured or cleared as an error invalid station temporarily by a master station by
using Link special relay (SB) and Link special register (SW).
■Method to select module in "Network status" and carry out
• Temporary error disabled station settings
• Temporary error disabled station settings/remove
1.
On the "CC-Link IE Field diagnoses" window "Network
status", select the icon for the station for which to
temporarily set error invalid station status.
2.
Right click the selected icon, and select "Selected
station temporary error invalid station settings".
The text background color becomes yellow, and the station
temporarily set to an error disabled station.
1.
On the "CC-Link IE Field diagnoses" window "Network
status", select the icon for the station for which to
remove error invalid station settings.
2.
Right click the selected icon, and select "Selected
station temporary error invalid station settings".
The text background color becomes white, and the
temporary error disabled station setting is removed.
6 CC-Link IE Field Network FUNCTION
6.4 CC-Link IE Field Network diagnosis
6
69