Mitsubishi Electric MELIPC MI5000 Series User Manual page 263

No. Name
SD201 LED status
SD202 LED status
SD203 VxWorks part
operating status
SD260 Number of points
assigned for bit
devices
SD261
SD262
SD263
SD264
SD265
SD266
SD267
SD280 Number of points
assigned for word
devices
SD281
SD282
SD283
Content Details
MAIN LED status Stores which of the following product main LED status using the
following bit patterns.
• 0: OFF
• 1: ON
• 2: Flickering (fast/slow)
b15
(8)
(1)VX RDY LED
(2)WIN RDY LED
(3)MAIN ERR LED
(4)MAIN RUN LED
(5)FAN LED
(6)INFO LED
(7) Reserved
(8)BATTERY LED
CC-Link IE Field • This register uses the following bit patterns to store the status of the
Network LED status CC-Link IE Field Network LED of this product.
• 0: OFF
• 1: ON
• 2: Flickering (fast/slow)
b15
(1)RUN LED
(2)ERR LED
(3)MST LED
(4)D LINK LED
(5)SD/RD LED
(6)L ERR LED
STOP/RUN status of The operation status (STOP/RUN) of the VxWorks part of this product is
the VxWorks part stored as follows.
• 0: RUN
• 1: Reserved
• 2: STOP
• 3: Reserved
Number of points The number of points of the X device currently set is stored as 32-bit
assigned for X (L) data.
Number of points
assigned for X (H)
Number of points The number of points of the Y device currently set is stored as 32-bit
assigned for Y (L) data.
Number of points
assigned for Y (H)
Number of points • The number of points of the M device currently set is stored as 32-bit
assigned for M (L) data.
• The number of points assigned is stored even if the number of points
Number of points
assigned for M is 32K or less.
assigned for M (H)
Number of points • The number of points of the B device currently set is stored as 32-bit
assigned for B (L) data.
• The number of points assigned is stored even if the number of points
Number of points
assigned for B is 32K or less.
assigned for B (H)
Number of points • The number of points of the D device currently set is stored as 32-bit
assigned for D (L) data.
• The number of points assigned is stored even if the number of points
Number of points
assigned for D is 32K or less.
assigned for D (H)
Number of points • The number of points of the W device currently set is stored as 32-bit
assigned for W (L) data.
• The number of points assigned is stored even if the number of points
Number of points
assigned for W is 32K or less.
assigned for W (H)
(7) (6) (5) (4) (3)
(6) (5) (4) (3)
Appendix 6 List of Special Registers
Set by (when to
set)
S (status change)
b0
(2) (1)
S (status change)
b0
(2) (1)
S (system)
S (initial)
S (initial)
S (initial)
S (initial)
S (initial)
S (initial)
S (initial)
S (initial)
S (initial)
S (initial)
S (initial)
S (initial)
APPX
261
A