Mitsubishi Electric MELIPC MI5000 Series User Manual page 66

Cable test
The cable test checks for disconnected or broken Ethernet cables.
Only Ethernet cables connected to P1 or P2 of the station implementing the test are subject to testing. Check the status of the
entire network by the network configuration diagram of the CC-Link IE Field diagnosis or the selected station communication
status monitor. (Page 60 Network configuration diagram, Page 62 Selected station communication status monitor)
Window
■Execution procedure
1.
In the "CC-Link IE Field diagnoses" window, click the [Cable test] button.
2.
Input the station No. for which to carry out a cable test, then click the [Run test] button.
If an error occurs, then handle in accordance with the error message.
6 CC-Link IE Field Network FUNCTION
64
6.4 CC-Link IE Field Network diagnosis