Mitsubishi Electric MELIPC MI5000 Series User Manual page 147

12
MELSOFT PRODUCT AND GOT CONNECTION
FUNCTION
This function monitors and tests the VxWorks part from a MELSOFT product or GOT using the Ethernet port (CH1) of this
product or virtual Ethernet.
Use this function with a hub connection (specify an IP address for connection) for remote operations using Ethernet for long-
distance connections and high-speed communications or to connect MI Configurator on multiple devices or other MELSOFT
products.
12.1
Connection Method
This section shows the method for connecting MELSOFT products with GOT.
Settings of this product
1.
Configure the IP address of the Ethernet port (CH1). ( Page 162 BASIC PARAMETERS)
2.
Set a connection configuration in "External Device Configuration" of "Basic Settings". (Page 183 External Device
Configuration)
■Ports used by the system
Do not use ports used by the system.
The Ethernet port (CH1) and virtual Ethernet use the following ports on the system.
port number
Decimal
1534
5000
5001
5002
5003
5004
5005
5006
5007
5008
5009
61440
61470
Even in the case of port numbers not mentioned above, ports 1 to 1023 are generally reserved (WELL
KNOWN PORT NUMBERS), and Ports 61441 to 65534 are used by other communications functions.
Therefore, use Ports 1024 to 1533, 1535 to 4999, and 5010 to 61439.
Hexadecimal
05FEH
1388H
1389H
138AH
138BH
138CH
138DH
138EH
138FH
1390H
1391H
F000H
F01EH
Application
For system
Automatic open UDP port
MELSOFT application communication port (UDP/IP)
MELSOFT application communication port (TCP/IP)
For system
12 MELSOFT PRODUCT AND GOT CONNECTION FUNCTION
145
12.1 Connection Method
12