Mitsubishi Electric MELIPC MI5000 Series User Manual page 59

Diagnostic screen
[Diagnostics]  [CC-Link IE Field Diagnosis]
Item
Select Diagnostics Select Station
Destination
Monitor Status [Start Monitoring] button
[Stop Monitoring] button
[Update] button
[Legend] button
St. Info
Description
Selects the station No. of the station to diagnose.
It is also possible to select the station to diagnose by clicking the icon of the module
displayed on the network configuration diagram.
Starts CC-Link IE Field diagnoses monitoring.
Stops CC-Link IE Field diagnoses monitoring.
When the actual network configuration and the network configuration diagram of the
diagnosis screen do not match, update the network configuration diagram so that it
matches. Updating the network configuration diagram reconnects all stations on the
network, which results in a momentary data link error for all stations, and output may be
OFF for connected slave stations. Configure so that output is maintained, if necessary.
Indicates the legend for icons displayed in CC-Link IE Field diagnoses.
Select the slave station display name from "By Device Name" and "By Station Type".
If "By Device Name" is selected, then this will display content input into the "Alias" in
"Network Configuration Settings" under "Basic Settings".
Pay attention to the following as regards device name display.
• If the "Device name" is not input into the "Alias" in "Network Configuration Settings"
under "Basic Settings", then the device type will be displayed.
6 CC-Link IE Field Network FUNCTION
6.4 CC-Link IE Field Network diagnosis
6
57