Mitsubishi Electric MELIPC MI5000 Series User Manual page 169

■Time Setting
Item
Time Setting (SNTP Client)
SNTP Server IP Address
Time Setting After Power-on and Reset

Execution
Timing
Time Intervals

Specified
time (hour,
minute, day)
Specificatio
n of time
(Hour,
Minute)
Specificatio
n of day of
week
(Sunday,
Monday,
Tuesday,
Wednesda
y,
Thursday,
Friday,
Saturday)
Clock data 
synchronizatio
n setting
Clock data synchronization
Synchronization origin
Synchronization cycle
■Serial I/F setting
Item
Serial I/F setting
Description
Select whether to use the time setting function
(SNTP client) to configure the time of the VxWorks
part automatically.
Set the IP address of the SNTP server.
Select whether to configure the time by the time
setting function after the power supply is switched
ON or a reset.
Choose the timing of the time setting function.
Configure the time interval (minutes) to configure
the time during fixed cycle specification.
Configure to specify the hour, minute, and day to
configure the time during fixed cycle specification.
 Configure the specified time (hour, minute)
Hour Configure the time (hour) when the timing of the
time setting is a specified time.
Minute Configure the time (minute) when the timing of the
time setting is a specified time.

Configure to specify the day to configure the time
during fixed cycle specification.
Sunday Configure whether to specify Sunday for the day
specification.
Monday Configure whether to specify Monday for the day
specification.
Tuesday Configure whether to specify Tuesday for the day
specification.
Wednesda Configure whether to specify Wednesday for the
y day specification.
Thursday Configure whether to specify Thursday for the day
specification.
Friday Configure whether to specify Friday for the day
specification.
Saturday Configure whether to specify Saturday for the day
specification.
Clock data of the VxWorks part and Windows part
can be synchronized on a fixed cycle.
Configure "Do not use" or "Use" for the clock data
synchronization function.
If "Use" is configured, the clock data
synchronization can be used.
Configure the synchronization origin to "VxWorks
part" when using the clock data synchronization
function between the VxWorks part and Windows
part.
Configure the synchronization cycle to run the
clock data synchronization function.
Description
Specify whether to assign the serial communication
port to the Windows part or VxWorks part.
Setting range parameter
No.
• Do not use A039H
• Use
(Default: Do not use)
0.0.0.1 to A039H
223.255.255.254(When
entering using decimal
numbers)
(Default: 0.0.0.1)
• Disable A039H
• Enable
(Default: Disable)
• Fixed Time A039H
• Time Intervals
(Default: Fixed Time)
1 to 1440 minutes
(Default: 1 minute)


0 to 23
(Default: 12)
0 to 59
(Default: 0)

Set
Not Set
(Default: Set)
 6E12H
• Use
• Do not use
(Default: Use)
VxWorks part
1 to 1440 minutes
(Default: 60 minutes)
Setting range parameter
No.
• Windows part 6E13H
• VxWorks part
(Default: Windows part)
17 BASIC PARAMETERS
17.1 Basic Parameter List
17
167