Mitsubishi Electric MELIPC MI5000 Series User Manual page 171

Displayed items
■WDT (Watchdog Timer) settings (VxWorks part)
Item

System WDT
settings
Monitoring time
■WDT (Watchdog Timer) setting (Windows part)
Item

System WDT
settings
Monitoring time
■MELIPC operation upon error detection setting
Item
MELIPC temperature error
Windows part stop
■LED display setting
Item

MAIN ERR
LED
Minor error
(Continue error)
■Event history settings
Item
Save-capacity settings
Description
Set the system WDT setting (VxWorks part).
Set the system WDT monitoring time.
Description
Set the system WDT setting (Windows part).
Set the system WDT monitoring time.
Description
Set the device operation upon detection of a Main module temperature
error.
If "Shutdown" is set, the VxWorks part and Windows part shut down
when an error is detected.
Set operation of the Windows part when a stop state is detected due to
a Windows bluescreen, timeout detection from the Windows part
system watchdog timer.
Description
Configure the display of the MAIN ERR LED.
Set MAIN ERR LED to "Display" or "Do not display" when a minor error
(continuation error) is detected.
Description
Set the storage capacity per event history file.
Setting a large save quantity enable saving of a larger number of
events.
Setting range parameter
No.

3500H
20 to 2000 [ms](10 ms
units)
(Default: 1,000 ms)
Setting range parameter
No.

6E11H
1 to 600 (s) (1 s units)
(Default: 5 s)
Setting range parameter
No.
• Shut down 3501H
• Do not shut down
(Default: Shutdown)
• Do not restart
• Restart
(Default: Do not restart)
Setting range parameter
No.

3502H
• Display
• Do not display
(Default: Display)
Setting range parameter
No.
2 to 2048 (KB) (1 KB units) 3504H
(Default: 128 KB)
17 BASIC PARAMETERS
17.1 Basic Parameter List
17
169