Mitsubishi Electric MELIPC MI5000 Series User Manual page 142

11.2
Service Setting Function
This function enables and disables services running on the VxWorks part.
Unauthorized access from other users can be prevented by restricting services in operation.
Service settings
Configure the settings by using "Service Settings".
Window
[Basic Parameter]  [Service Settings]  [Service Setting]
Displayed items
Item
WDB
Shell
MELSEC data link function
MI Configurator operations
*1 If this service is disabled, the Telnet service cannot be used either.
Precautions
If MI Configurator operations are disabled, parameters cannot be configured. To enable service, initialize this product.
(MELIPC MI5000 Series User's Manual (Startup))
11 SECURITY FUNCTION
140
11.2 Service Setting Function
Description
Required to connect CW Workbench 4 and WindRiver Workbench 4.
*1
Required to execute commands.
Required to use MELSEC communication.
Required for operations related to MI Configurator parameters.
If this service is disabled, the following operations cannot be performed.
• Writing to this product
• Reading from this product
• Verifying with this product
• Data deletion on this product
• Memory operations (initialization)
Setting range
• Enable
• Disabled
(Default: Enabled)