Mitsubishi Electric MELIPC MI5000 Series User Manual page 37

Clearing of device values
The values of devices of this product can be cleared.
The following table shows devices that can be cleared.
Item
Clearing of device
Clearing of file register
During clearing of devices, the values of other than devices (not M, B, D, and W) and the buffer memory are
not cleared.
Operating procedure
Device values are cleared by an MELIPC memory operation.
[Online][MELIPC memory operation][Clearing of values]
Precautions
• Clear device values when the operating status of this product is STOP. If the status is RUN, an error occurs.
• If the power supply of this product is turned OFF to ON or the product is reset while the file register is being cleared, the
clearing of the file register may not be completed normally. Clear the file register again.
Description
The all values of the devices (M, B, D, and W) of the product are set to 0.
The all values of the file register (ZR) of the product are set to 0.
3 PROGRAMMABLE CONTROLLER DEVICE MEMORY FUNCTION
3
35