Download Print this page

Mitsubishi Electric MELIPC MI5000 Series User Manual page 273

Hide thumbs Also See for MELIPC MI5000 Series:

Advertisement

Appendix 8
This section shows the link special registers of this product.
Range for user ON/OFF and system ON/OFF.
• Range for user ON/OFF: SW0000 to SW001F
• Range for system ON/OFF: SW0020 to SW01FF
Precautions
Do not write data to special registers not listed in the link special register list. Otherwise, there is a risk of a product
malfunction.
No.
Name
SW0000
Link start/stop direction details
SW0001 to
Link start/stop station specification
SW0008
SW0010 to
Reserved station temporary clear /
SW0017
temporary error disabled station setting
SW0040
Network No.
SW0042
Station No.
SW0043
Own station mode status
List of Link Special Registers
Description
Sets data link start/stop direction details
■00H: Own station
■01H: All stations
■02H: Specified station
■80H: Own station forced (enabled only at start of data link)
■81H: All station forced (enabled only at start of data link)
■82H: Specified station forced (enabled only at start of data link)
• Start/stop data link with 'system link start' (SB0002) or 'system link stop' (SB0003).
• 02H: Specified station and 82H: Specified station forced do not include own station.
When setting 02H: Specified station and 82H: Specified station forced in 'link start/stop specification
details' (SW0000), set the station for data link start/stop.
• 0: No start/stop instruction
• 1: Start/stop instruction
The numbers within the following illustration indicate the station numbers.
b15
SW0001
16 15 14 13 12
32 31 30 29 28
SW0002
SW0007
112 111 110 109 108
SW0008
-
-
- 125 -
Specify a slave station to carry out reserved station temporary clear/remove and temporary error
disabled station settings/remove.
• 0: No specification
• 1: Specification
The numbers within the following illustration indicate the station numbers.
b15
SW0010
16 15 14 13 12
SW0011
32 31 30 29 28
SW0016
112 111 110 109 108
-
-
-
SW0017
<Conditions>
• There is a station for which reserved station temporary clear/remove and temporary error disabled
station settings/remove cannot be specified.
• The status is not stored for the station numbers after the maximum station number.
Stores the network number of own station.
(Range: 1 to 239)
Stores the own station's station number.
(Range: 1 to 120, 125 (master station), 255 (station number not set))
Stores own station operational mode settings/communications mode settings.
• 1: Online mode/high-speed mode
• 2: Offline mode
~
5
4
3
~
21 20 19 18 17
~
~
102 101 100 98 97
~
117 116 115 114 113
~
5
4
3
~
21 20 19 18 17
~
~
102 101 100 98 97
-
-
~
117 116 115 114 113
Appendix 8 List of Link Special Registers
b0
2
1
b0
2
1
APPX
271
A

Advertisement

loading

This manual is also suitable for:

Melipc mi5122-vw