Transfer The Results - Thermo Scientific Applied Biosystems QuantStudio User Manual

Transfer the
results
QuantStudio ™ 3D Digital PCR System User Guide
Following an image analysis, the QuantStudio
the experiment (.eds) file for the chip to the selected destination and saves a copy of
the file locally to the instrument. You can access and/or download the experiment
(.eds) files of previous runs from the Run History screen.
If you did not transfer data from the instrument to a USB, the Connect cloud-based
platform, or a network location at the time of the run (as described in "Specify the
data destination" on page 42), you can use the Run History screen to copy
experiment files to a USB drive for storage or manual transfer. This may be necessary
if the network connection failed or the USB drive was full during an run.
1. Insert a USB drive into the port on the front of the instrument.
2. In the touchscreen, touch
3. In the Settings Menu, touch Run History to view the results for the past
experiments.
Note: The QuantStudio
600 experiment files before it begins purging the files from memory. When the
instrument reaches the limit, it replaces the oldest file exported from the cache
with the data from the current run.
Chapter 5 Image and analyze the chips
™
3D Digital PCR Instrument transfers
in the Main Menu.
™
3D Digital PCR Instrument can store approximately
5
Primary analysis
49