Install The Geneamp ™ Pcr System 9700; Unpack And Place The Geneamp ™ Pcr System 9700 Base Module - Thermo Scientific Applied Biosystems QuantStudio User Manual

Install the GeneAmp
Unpack and
place the
GeneAmp ™
PCR System
9700 Base
Module
QuantStudio ™ 3D Digital PCR System User Guide
Note: For information on opening templates and programming the thermal
cycler, see the ProFlex
you cannot locate the 3D template on your ProFlex
need to upgrade the firmware (see "Prepare the thermal cycler" on page 32).
The installation of the ProFlex
ready for use.
™
PCR System 9700
This section includes the essential procedures for preparing the GeneAmp
System 9700 for use. For complete instructions, see the GeneAmp
9700 Base Module User Manual (Pub. No. 4303481) or the GeneAmp
9700 Dual Flat Block User Manual (Pub. No. 4307808).
Note: For information on preparing the ProFlex
™
the ProFlex 2 × Flat PCR System" on page 68.
1. Open the package containing the Base Module.
2. Remove the packing crate from the package, and verify that it contains all of the
parts listed on the shipping manifest.
If you have not received one or more of the parts, contact customer support for
replacement (see "Customer and technical support" on page 123).
Appendix A Install the QuantStudio
Install the GeneAmp
™
PCR System User Guide (Pub. No. MAN0007697). If
™
PCR System is complete and the thermal cycler is
™
™ 3D Digital PCR System
™
PCR System 9700
™
PCR System, you may
™
PCR System
™
PCR System
2 × Flat PCR System, see "Install
A
™
PCR
73